Paper
5 January 1994 High-power Q-switched fiber laser
Tanya K. Oleskevich, Francois Seguin
Author Affiliations +
Abstract
Continuous wave (cw) and Q-switched fiber lasers were implemented using highly doped erbium fiber pumped with a 980-nm pigtailed laser diode. Thresholds and slope efficiencies were characterized for various reflector combinations to achieve optimal cw operation. An output coupling of 90% was found to produce maximum output power of 30 mW at 1560 nm with 78 mW of launched pump power. Pulsed operation was achieved with low loss on the first diffracted order of a bulk acousto-optic Q-switch. Output coupling from the fiber laser was obtained through an intrinsic fiber grating. Available pump power levels of 78 mW produced 20-ns pulses of 250 W peak power and a repetition rate of up to 3.5 kHz. The effects of repetition rate, cavity losses and pump power on the pulsewidth, peak power and lasing spectrum were characterized.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tanya K. Oleskevich and Francois Seguin "High-power Q-switched fiber laser", Proc. SPIE 2041, Mode-locked and Other Ultrashort Laser Designs, Amplifiers, and Applications, (5 January 1994); https://doi.org/10.1117/12.165623
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Q switched fiber lasers

Continuous wave operation

Q switching

Reflectivity

Laser damage threshold

Semiconductor lasers

Back to Top