Paper
10 August 1993 Systems considerations in the design of the High Energy Transient Experiment (HETE) ultraviolet objective lens
Thomas U. Kampe, Clark A. Pentico, Roland K. Vanderspek, Peter Tappan, George R. Ricker Jr.
Author Affiliations +
Abstract
A wide-field ultraviolet lens was developed under a contract from the Massachusetts Institute of Technology Center For Space Research in support of the NASA High Energy Transient Experiment (HETE). This 35 mm f/2.5 seven element lens operates over a broad portion of the near-ultraviolet spectrum and over a 52 degree field of view. Operation at cryogenic temperatures required that the lens system exhibit minimal change in focus with temperature. Aluminum was selected as the lens barrel material based on athermalization issues and the desire to minimize weight. Elastomeric bonding of elements into subcells was used for assembly along with a single adjustable airspace to compensate for tolerances.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas U. Kampe, Clark A. Pentico, Roland K. Vanderspek, Peter Tappan, and George R. Ricker Jr. "Systems considerations in the design of the High Energy Transient Experiment (HETE) ultraviolet objective lens", Proc. SPIE 1970, Systems-Oriented Optical Design, (10 August 1993); https://doi.org/10.1117/12.155828
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ultraviolet radiation

Optical design

Silica

Calcium

Glasses

Objectives

Gamma radiation

RELATED CONTENT

"New Improved Optical System For HYCAM Camera"
Proceedings of SPIE (November 02 1984)
How small stresses affect 351 nm damage onset in fused...
Proceedings of SPIE (April 07 1999)
New abnormal dispersion liquid for use in the design of...
Proceedings of SPIE (December 06 1993)
Ultraviolet Spectrograph Lens
Proceedings of SPIE (December 30 1981)

Back to Top