Problems in using diode arrays for open path DOAS measurements of atmospheric species

Jochen Stutz; Ulrich Platt

doi:10.1117/12.140192

12 February 1993 Problems in using diode arrays for open path DOAS measurements of atmospheric species

Jochen Stutz, Ulrich Platt

Proceedings Volume 1715, Optical Methods in Atmospheric Chemistry; (1993) https://doi.org/10.1117/12.140192
Event: Environmental Sensing '92, 1992, Berlin, Germany

Abstract

The `multiplex advantage' of diode array detectors over optomechanical spectral scanning devices promises to improve DOAS instruments by reducing measurement time about two orders of magnitude. Alternatively the signal to noise ratio can be improved by adding several scans. Unfortunately, the use of diode arrays gives rise to new problems. Two thin layers on the semiconductor (the protective SiO₂ layer plus deposits of vapor) produce spectral interference structures and a thermal recombination current in the diode junction is superimposed to the light signal. Interferences in the protective layer of the diode array impose spectral structures, which are subjected to slow changes due to deposition of vapor upon the diode array and rapid changes caused by varying illumination of the array due to air turbulence in the light path. Detailed model calculations reproduce the etalon structure measured in the laboratory by assuming the existence of a layer of SiO₂ (index of refraction n approximately equals 1.6) and a second layer with n approximately equals 1.3 (probably ice). A model considering the geometry of the spectrograph detector system is presented, which describes the influence of changing illumination of the diodes (i.e., caused by atmospheric turbulence) on the etalon structure. The dark current can, in principle, be reduced by cooling the diode array. However, low temperatures increase the complexity of the detector and enhance deposition of vapor, aggravating the etalon problem. The dark current, depending on the charge of the diode, is a complex function of light intensity and exposure time. Thus, subtracting the signal of the darkened diode array to remove the dark current signal leads to apparent nonlinearities. A model for the behavior of the dark current is presented, which allows the use of diode arrays without extensive cooling.

Citation Download Citation

Jochen Stutz and Ulrich Platt "Problems in using diode arrays for open path DOAS measurements of atmospheric species", Proc. SPIE 1715, Optical Methods in Atmospheric Chemistry, (12 February 1993); https://doi.org/10.1117/12.140192

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available