Paper
1 September 1991 Bundle of tapered fibers for the transmission of high-power excimer laser pulses
Hermine Hitzler, Norbert Leclerc, Christoph Pfleiderer, Juergen M. Wolfrum, Karl-Otto Greulich, Karl-Friedrich Klein
Author Affiliations +
Proceedings Volume 1503, Excimer Lasers and Applications III; (1991) https://doi.org/10.1117/12.46947
Event: ECO4 (The Hague '91), 1991, The Hague, Netherlands
Abstract
For the transmission of high-power excimer laser radiation in the kilowatt range, a flexible bundle of tapered quartz fibers is presented. Thirty fibers with a tapered coupling section are assembled in a bundle, which is tested with an excimer laser providing 2 J pulse energy at repetition rates of up to 20 pulses per second. The bundle showed good transmission qualities at 308 nm wavelength with an output power of 0.5 J/pulse. Catastrophic damage of fibers or other bundle elements did not occur during irradiation. The transmitted energy remained constant over the energy range tested with short irradiation times and low frequencies and is sufficient for material processing. At present, the transmission efficiency of the bundle is about 25%.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hermine Hitzler, Norbert Leclerc, Christoph Pfleiderer, Juergen M. Wolfrum, Karl-Otto Greulich, and Karl-Friedrich Klein "Bundle of tapered fibers for the transmission of high-power excimer laser pulses", Proc. SPIE 1503, Excimer Lasers and Applications III, (1 September 1991); https://doi.org/10.1117/12.46947
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Excimer lasers

Pulsed laser operation

Laser energy

Materials processing

Fiber lasers

Quartz

Reflection

Back to Top