Paper
1 September 1991 Recognition criterion for two-dimensional minimum resolvable temperature difference
Howard V. Kennedy
Author Affiliations +
Abstract
Performance models based on two-dimensional MRTD have been used in the industry for several years. The new C2NVEO thermal imaging model, FLIR90, has been available for almost a year now, and also uses a 2-D MRTD to predict range performance. A two- dimensional MRTD, if used with the same cycle count criteria as the older static performance model, will predict different detection and recognition ranges for any given target. Based on their psychophysical studies, C2NVEO recommends that recognition criteria for the new model be 3/4 of that used with the old model. A brief derivation of the two-dimensional MRT as a measure of resolution capability is presented. The modified criteria is then justified using the rationale of the derivation. A generic common module FLIR is analyzed using both the old and new models, showing how different ranges will be predicted if the same cycle criteria for recognition and detection is used. It is then demonstrated that similar ranges are predicted if the cycle criteria for the two models are set at the ratio of 4:3. A comparison of criteria for several sensors for which actual field measurements exist is also presented.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Howard V. Kennedy "Recognition criterion for two-dimensional minimum resolvable temperature difference", Proc. SPIE 1488, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing II, (1 September 1991); https://doi.org/10.1117/12.45802
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Minimum resolvable temperature difference

Systems modeling

Thermal modeling

Imaging systems

Performance modeling

Spatial frequencies

Thermography

RELATED CONTENT

Simulation of sampling effects in FPAs
Proceedings of SPIE (September 01 1991)
NVEOD FLIR92 thermal imaging systems performance model
Proceedings of SPIE (September 16 1992)
Limitations of MRTD-based IR sensor performance models
Proceedings of SPIE (August 31 1993)

Back to Top