Paper
1 March 1991 Corrosion evaluation of coated sheet metal by means of thermography and image analysis
Per Jernberg
Author Affiliations +
Abstract
The fact that organic binders, as used in paints, are transparent in the IR range 3.5-5.5 microns is utilized to detect and measure defects under the paint film of sheet metals. However, the method demands an elevated sample temperature to suppress reflections from the surrounding and is till now resorted to laboratory investigations. The IR system used is an AGEMA Thermovision 880 SWB. The maximum thickness of the paint film allowing evaluation is mainly governed by the absorption and the refraction caused by the paint pigments, depending upon pigment size and pigment material. To be detectable the defects have to be characterized by IR emissivities considerably different from the emissivity of the bare sheet metal as is found for metallic corrosion products. A quantitative determination of a corrosion attack is obtained by evaluating the IR image at a PC based image analyzer. As a standard today, such evaluations are performed by inspecting and comparing painted sheet metals with reference photographs. This method suffers both from the subjectiveness of the observer and the opaqueness of the paint film in the visible range.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Per Jernberg "Corrosion evaluation of coated sheet metal by means of thermography and image analysis", Proc. SPIE 1467, Thermosense XIII, (1 March 1991); https://doi.org/10.1117/12.46443
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Image analysis

Metals

Corrosion

Cameras

Standards development

Computing systems

Thermography

Back to Top