Paper
1 January 1991 Aligning diamond-turned optics using visible-light interferometry
Author Affiliations +
Proceedings Volume 1354, 1990 Intl Lens Design Conf; (1991) https://doi.org/10.1117/12.47943
Event: 1990 International Lens Design Conference, 1990, Monterey, CA, United States
Abstract
A problem can arise when a set of optics must be aligned but intrinsic surface errors dominate alignment wavefront errors. Aligning diamond-turned optics interferometrically at visible wavelengths is one such example. Diamond-turned optics can exhibit a high-spatialfrequency surface ripple from the machining process, which, in many cases, can render an interferogram unintelligible to the point that even serious alignment errors cannot be detected. In an alignment demonstration conducted last year this problem was encountered head on and two techniques were applied to extract meaningful wavefront data. The first relied on spatial filtering of the return wavefront to smooth out the effects of high-slope surface errors. This approach showed potential in that it is a simple method that can be easily applied. The second approach used a new software algorithm, available as part of the Zygo Mark lV phase measuring interferometer, where regions of fringe discontinuities are discarded and the resultant piece-wise phase map is reconstructed as a continuous wavefront. Using this latter approach, we were able to precisely align a three-mirror telescope comprised of diamondturned mirrors and used in a double-pass configuration. The approaches to be described are applicable to the alignment of infrared and visible sensors and metrology of single surfaces.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John W. Figoski "Aligning diamond-turned optics using visible-light interferometry", Proc. SPIE 1354, 1990 Intl Lens Design Conf, (1 January 1991); https://doi.org/10.1117/12.47943
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Wavefronts

Optical alignment

Mirrors

Spatial filters

Monochromatic aberrations

Interferometers

Interferometry

RELATED CONTENT

In-process metrology for large astronomical mirrors
Proceedings of SPIE (November 01 1990)
Test And Manufacture Of 3-Mirror Laboratory Telescope
Proceedings of SPIE (August 04 1988)
Tests And Quality Of The 3.5 Meter Primary Mirror Of...
Proceedings of SPIE (November 04 1982)
Computer-aided optical alignment method
Proceedings of SPIE (August 01 1990)
Optical Characterization Of The Lockheed Sensor Test Facility
Proceedings of SPIE (September 22 1983)

Back to Top