Paper
18 September 2024 Optical investigation of stacked absorber type black border on EUV mask
Daimu Ikeya, Yohei Ikebe, Tsutomu Shoki
Author Affiliations +
Proceedings Volume 13273, 39th European Mask and Lithography Conference (EMLC 2024); 132730L (2024) https://doi.org/10.1117/12.3026940
Event: 39th European Mask and Lithography Conference (EMLC 2024), 2024, Grenoble, France
Abstract
In EUV lithography, the leaked light reflected from the border of the image field (image border) can cause unintended pattern transfer on die edge. To prevent such an unexpected exposure, low reflectivity image border, referred to as black border, has been widely adopted. However, the current multilayer etched type black border can have insufficient specifications required for high NA lithography in terms of the reflectivity and border edge quality. In this paper, we investigated stacked absorber type black border, where an additional absorber is stacked on the conventional absorber, as an alternative candidate through optical simulation and preliminary experiment. The simulation shows that stepwise nk change in the additional absorber is an effective design to reduce EUV and DUV reflectivity significantly. In the experiment, we fabricated a test mask blank with the same film structure as the simulation model and measured the reflectivity. It is successfully confirmed that stacked absorber type black border has better optical properties than multilayer etched type.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Daimu Ikeya, Yohei Ikebe, and Tsutomu Shoki "Optical investigation of stacked absorber type black border on EUV mask", Proc. SPIE 13273, 39th European Mask and Lithography Conference (EMLC 2024), 132730L (18 September 2024); https://doi.org/10.1117/12.3026940
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectivity

Extreme ultraviolet

Deep ultraviolet

Design

Lithography

Extreme ultraviolet lithography

Multilayers

RELATED CONTENT

Overview of extreme ultraviolet lithography
Proceedings of SPIE (December 07 1994)
Update on the EUVL mask blank activity at Schott Lithotec
Proceedings of SPIE (December 17 2003)
Reflectivity of Mo/Si multilayer systems for EUVL
Proceedings of SPIE (June 25 1999)

Back to Top