Automated transducer deployment for Lamb wave-based nondestructive evaluation of plates

Christoph Schaal; Ruben Granados; Morgan Barrett; Kathryn Davis

doi:10.1117/12.3009829

9 May 2024 Automated transducer deployment for Lamb wave-based nondestructive evaluation of plates

Christoph Schaal, Ruben Granados, Morgan Barrett, Kathryn Davis

Proceedings Volume 12951, Health Monitoring of Structural and Biological Systems XVIII; 1295117 (2024) https://doi.org/10.1117/12.3009829
Event: SPIE Smart Structures + Nondestructive Evaluation, 2024, Long Beach, California, United States

Abstract

Lamb wave-based inspection methods show promise in long range Nondestructive Evaluation (NDE) of thin metallic and composite plates. This NDE strategy is typically implemented in a pitch-catch configuration of one actuator and at least one sensor. Despite non-contact methods such as laser ultrasonics and air-coupled transducers, the most common approach relies on contact transducers. Transducer placement is usually performed manually and positional errors and variations in contact conditions are therefore inevitable. Thus, this study investigates the potential improvement in measurement reliability and repeatability through the use of an automated deployment system. The system is comprised of two subsystems: 1) A gel deployment subsystem to deposit the desired amount of couplant at the target location. 2) A transducer deployment subsystem to lower the transducer onto test article. In addition to a detailed description of the developed prototype systems, their combined reliability is demonstrated for experiments on an aluminum panel in a broad frequency range. The results are compared to those obtained via transducers positioned by multiple different human operators. These benchmark experiments are conducted with varying degree of aids, such as placement templates and weights. Furthermore, measurements from manual placement are processed both manually as well as automatically to further illustrate the need for fully automated NDE capabilities. It is shown that the automated prototype transducer deployment system not only reduces manual labor but achieves slightly improved repeatability as compared to an experienced human operator with positioning aids.

Conference Presentation

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Christoph Schaal, Ruben Granados, Morgan Barrett, and Kathryn Davis "Automated transducer deployment for Lamb wave-based nondestructive evaluation of plates", Proc. SPIE 12951, Health Monitoring of Structural and Biological Systems XVIII, 1295117 (9 May 2024); https://doi.org/10.1117/12.3009829

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available