Dense wavelength division (de-)multiplexer for space application

Marco Plötner; Steffen Trautmann; Till Walbaum; Thomas Schreiber

doi:10.1117/12.3000885

8 March 2024 Dense wavelength division (de-)multiplexer for space application

Marco Plötner, Steffen Trautmann, Till Walbaum, Thomas Schreiber

Proceedings Volume 12882, Optical Components and Materials XXI; 128820G (2024) https://doi.org/10.1117/12.3000885
Event: SPIE OPTO, 2024, San Francisco, California, United States

Abstract

Dense wavelength division multiplexing techniques are widely used in terrestrial state-of-the-art telecom applications. The optical link between the terminals requires a data rate in the terabyte range which is typically realized by transmitting multiple wavelengths though one common channel. For satellite communications, completely new requirements and demands arise where the common technologies cannot be used without further ado. In space, it is also completely impractical to set up repeaters at short distances, so the WDM must have a capacity of tens of Watts power capability to cover the very long propagation length. The development and realization of a space-suitable Dense Wavelength Division Multiplexer and Demultiplexer are described. Both units combine (or split, respectively) ten channels into / from one common channel. The design central wavelength is around 1070 nm and the channels are chosen with a separation of 92-GHz corresponding to approximately 0.35 nm. The multiplexer has a target power handling of at least five Watts per channel. The input channels are equipped with PM fibers, whereas the multiplexed output is free space propagating, avoiding nonlinear effects and thermally induced fiber damage. The Demultiplexer is fiber coupled at input and output ports due to the reduced power requirements of sub Milliwatts. In both cases a diffraction grating is used as wavelength selective element. Its nonlinear angular dispersion is compensated with a non-equidistant fiber arrangement. The WDMs are characterized regarding optical parameters. The components are designed for space suitability, using appropriate materials and thermal design.

Conference Presentation

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Marco Plötner, Steffen Trautmann, Till Walbaum, and Thomas Schreiber "Dense wavelength division (de-)multiplexer for space application", Proc. SPIE 12882, Optical Components and Materials XXI, 128820G (8 March 2024); https://doi.org/10.1117/12.3000885

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available