Paper
27 November 2023 Geometric characteristics measurement technique for film cooling holes based on spectral interferometry system
Hongyu Shen, Min Xia, Wenping Guo, Kecheng Yang
Author Affiliations +
Abstract
The utilization of film cooling holes design can ensure rapid cooling of the aero engines turbine to achieve effective blade protection. To achieve optimal cooling, geometric features such as aperture, hole spacing and cone angle of the film cooling holes are necessary to be measured. We propose a spectral interferometry system method, which can measure aperture and depth of the holes and surface topography of the engine blade, and calculate the geometric characteristics of the holes by processing this information by 3d point cloud. Comparing the measurement result of our system with the measurement result of film cooling holes slice, it can be obtained that the error of aperture and spacing of holes is about 20μm, the repeated measurement accuracy is 0.8μm, and the cone angle error is about 2°.
(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Hongyu Shen, Min Xia, Wenping Guo, and Kecheng Yang "Geometric characteristics measurement technique for film cooling holes based on spectral interferometry system", Proc. SPIE 12769, Optical Metrology and Inspection for Industrial Applications X, 127690W (27 November 2023); https://doi.org/10.1117/12.2688643
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometry

Fourier transforms

Mirrors

Point clouds

Interpolation

Light sources

Design and modelling

Back to Top