Ultraviolet-visible microspectrophotometer system for small-spot measurement and characterization of thin films

Vincent J. Coates; Warren Lin; Rodney P. Johnson; Dennis Paull

doi:10.1117/12.20076

1 June 1990 Ultraviolet-visible microspectrophotometer system for small-spot measurement and characterization of thin films

Vincent J. Coates, Warren Lin, Rodney P. Johnson, Dennis Paull

Author Affiliations +

Proceedings Volume 1261, Integrated Circuit Metrology, Inspection, and Process Control IV; (1990) https://doi.org/10.1117/12.20076
Event: Microlithography '90, 1990, San Jose, CA, United States

Abstract

The ultraviolet range of wavelengths, 200 -400 rim, hold considerable promise for improved measurement and characterization of certain thin films on wafers. In this region of the spectrum, small differences in chemical composition and variation in the optical constants of materials can produce important differences in the reflectivity. These can be observed by using a high sensitivity microspectrophotometer system. It is also well known that small differences in the composition and structure of metallic and semi-metaffic surfaces will cause pronounced differences in ultraviolet light reflectance. The visible-near infrared wavelength range from 400 - 900 rim has been well exploited for many years by the use of computerized microspectrophotometer systems (See Notes 1 , 2and3)designed to measure reflection spectra and mathematically calculate thickness and other properties of films. Many thousands of these units have been installed in wafer fabrication facilities throughout the world, and they are in routine use for film thickness production control. The present paper will not dwell on the well-known capability of these systems. In recent years there has been new research into and development of improved photolithography systems which use deep ultraviolet light to expose photoresist patterns on wafers. Deep ultraviolet radiation is generated for these systems by excimer laseis which emit wavelengths near 250 nm, and in other designs by quartz mercury lamps which produce a strong emission line also near 250 nm. In order to characterize sublayer surfaces below the photoresist to achieve known and reproducible reflectance which can affect exposure time, it will be necessary to measure and control reflectance and absorption of fihns produced by chemical vapor deposition, metallization, or other means.

Citation Download Citation

Vincent J. Coates, Warren Lin, Rodney P. Johnson, and Dennis Paull "Ultraviolet-visible microspectrophotometer system for small-spot measurement and characterization of thin films", Proc. SPIE 1261, Integrated Circuit Metrology, Inspection, and Process Control IV, (1 June 1990); https://doi.org/10.1117/12.20076

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available