Paper
1 August 1990 Using single-mode infrared fibers for interferometry: progress report
Author Affiliations +
Abstract
With the recent availability of low-loss single-mode fluoride glass fibers, it becomes possible to consider interferometric beam recombination with fibers at infrared wavelengths. After a brief description of their present performances, specific aspects of the use of single-mode fibers in the infrared are studied here. In an astronomical interferometer thermal emission from the fibers will limit the sensitivity if they are not cooled. It is interesting to use the fibers at large X/? ratios: the beam is wider inside the fiber, most of the energy being routed by the cladding, and the coupling to starlight is eased because it can be done at slower f-ratios. This is true as long as X/X<2; beyond, evanescent field leaks through the fiber coating at the bends become too strong and prevent any practical use of the fiber. Far field beam profiles have been measured in the K and L bands. A project for a laboratory demonstration interferometer is presented: fringes were obtained in the visible and an extension to longer wavelengths is under way.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vincent Coude du Foresto and Gwenael Maze "Using single-mode infrared fibers for interferometry: progress report", Proc. SPIE 1237, Amplitude and Intensity Spatial Interferometry, (1 August 1990); https://doi.org/10.1117/12.19324
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Glasses

Infrared radiation

Interferometers

Interferometry

Cladding

Telescopes

Back to Top