Paper
8 July 2022 Precision measurement method based on optimized combination of pixel-binning cameras
Author Affiliations +
Abstract
Traditional binocular stereo vision measurement system based on high resolution area array camera has many defects, such as limited acquisition speed, insufficient sensitivity under high frame rate and overlarge data volume. To overcome these defects, this paper proposes a precision vision measurement method which is based on the optimized combination of pixelbinning cameras. This method transforms the traditional area array camera into an equivalent narrow area array (ENAA) camera through single-dimensional binning. Then, multiple ENAA cameras are used to achieve precise 3D measurement of target points through reasonable combination. However, single-dimensional binning will reduce the image resolution in one direction, while the image resolution in another direction (maximum image resolution) remains unchanged. Therefore, this paper studies the typical spatial layouts of two even three ENAA cameras and analysis their measurement errors. Finally, an optimal spatial layout of three ENAA cameras was obtained, and it can reach the same level of measurement accuracy as the binocular stereo vision measurement system based on area array camera. Comparative experiments verify the effectiveness and measurement accuracy of the above method, which can reduce the data amount to 3/8 and increase the acquisition rate by 4 times while ensuring the measurement accuracy.
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xu Wang Sr., Yang Gao, and Hengyu Cui "Precision measurement method based on optimized combination of pixel-binning cameras", Proc. SPIE 12282, 2021 International Conference on Optical Instruments and Technology: Optoelectronic Measurement Technology and Systems, 1228212 (8 July 2022); https://doi.org/10.1117/12.2616334
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Imaging systems

Monte Carlo methods

Visualization

Error analysis

Image resolution

Device simulation

RELATED CONTENT

4MOST metrology system error analysis
Proceedings of SPIE (July 10 2018)
Characterization of irregularly shaped bodies
Proceedings of SPIE (June 12 1995)
Capturing and presenting shared multiresolution video
Proceedings of SPIE (July 01 2002)
Theoretical error analysis with camera parameter calibration
Proceedings of SPIE (October 25 2004)
Research on visual positioning based on dual UAV collaboration
Proceedings of SPIE (September 15 2021)

Back to Top