Paper
28 March 2022 Optimization of focusing position in laser induced breakdown spectroscopy system based on quantitative analysis internal standard method of steel
Zhicong Li, Jianfeng Yang, Zhiyuan Wang, Yiyi Zhao, Shuaidong Huang, Shengrun Liu
Author Affiliations +
Proceedings Volume 12169, Eighth Symposium on Novel Photoelectronic Detection Technology and Applications; 12169DG (2022) https://doi.org/10.1117/12.2627459
Event: Eighth Symposium on Novel Photoelectronic Detection Technology and Applications, 2021, Kunming, China
Abstract
A laser induced breakdown spectroscopy (LIBS) system has many experimental key parameter factors. Focusing position in laser induced breakdown spectroscopy (LIBS) system is an experimental key parameter factor. The optimization of spectral intensity has been studied, but the results are often inaccurate. In this Letter, A quantitative analysis internal standard method was proposed to optimize the parameter of LIBS experimental system. One 100mm focusing lens and eight standard alloy steels with rich element content were employed as samples. By employing internal standard method, the minority elements (Mn, Cr, Cu) in steels were quantitatively analyzed and the element detection sensitivity was obtained. The limit of detection (LOD) of the minority elements under different focusing states was calculated, and finally the optimal focus position was obtained. The result which indirectly shows that the best laser focusing position of LIBS system with 100mm focusing lens is 6mm below the surface of samples, and the limit of detection (LOD) of the minority elements maintain the minimum value at this position (0.00159 wt.%), which indicates that the quantitative analysis method is effective and reliable for optimizing the parameters of LIBS system.
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhicong Li, Jianfeng Yang, Zhiyuan Wang, Yiyi Zhao, Shuaidong Huang, and Shengrun Liu "Optimization of focusing position in laser induced breakdown spectroscopy system based on quantitative analysis internal standard method of steel", Proc. SPIE 12169, Eighth Symposium on Novel Photoelectronic Detection Technology and Applications, 12169DG (28 March 2022); https://doi.org/10.1117/12.2627459
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser induced breakdown spectroscopy

Quantitative analysis

Chromium

Plasma

Calibration

Chemical elements

Iron

Back to Top