Paper
19 November 2021 Measurement of three degrees of freedom error motions of rotary axis based on auto-collimation principle
Author Affiliations +
Proceedings Volume 12059, Tenth International Symposium on Precision Mechanical Measurements; 1205912 (2021) https://doi.org/10.1117/12.2612028
Event: Tenth International Symposium on Precision Mechanical Measurements, 2021, Qingdao, China
Abstract
Due to the components of DD motor exist errors in the process of machining and assembly, which will generate error motions in rotary axis when the DD motor starts running. To solve the above problems, this paper presents a measurement method for three degrees of freedom error motions of rotary axis based on auto-collimation principle. The proposed system consists of two collimated laser, two beam splitters, two quadrant photodiode detectors (QPDs), four lenses and a high precision steel ball mounted on the top of DD motor. The error motions of the rotary axis result in the changes of the position of high precision steel ball. Thus, the shift values of laser beams reflected from the high precision steel ball are detected by the QPDs. The experimental results show that the radial and axial error motions of DD motors is less than 3.2μm and range from -1.5μm to 2μm respectively
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Weijing Ding, Huining Zhao, Liandong Yu, and Haojie Xia "Measurement of three degrees of freedom error motions of rotary axis based on auto-collimation principle", Proc. SPIE 12059, Tenth International Symposium on Precision Mechanical Measurements, 1205912 (19 November 2021); https://doi.org/10.1117/12.2612028
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Motion measurement

Spindles

Calibration

Optical testing

Sensors

Beam splitters

Lenses

Back to Top