Paper
24 June 2021 Effect of laser rust removal on surface roughness of 3Cr2Mo die steel
Author Affiliations +
Proceedings Volume 11885, International Conference on Laser, Optics and Optoelectronic Technology (LOPET 2021); 1188505 (2021) https://doi.org/10.1117/12.2602274
Event: 2021 International Conference on Laser, Optics and Optoelectronic Technology (LOPET 2021), 2021, Xi'an, China
Abstract
In order to extend the service life of injection mold, the use of laser rust removal was used to repair the surface quality of mold steel in this paper. The surface corrosion of mold steel was removed by using the laser dry cleaning method, then the surface roughness was restored to the initial state to meet the performance requirements of manufacturing. By analyzing the experimental results, the influence of laser energy density, spot overlap rate and scanning times on improving the surface quality of corroded area was obtained. It was shown that when the laser energy density, spot overlap rate and scanning times is 26 J/cm2, 18% and 3 times respectively, the optimum surface roughness of Sa2.32μm can be obtained, which meets the production requirements. Compared with traditional rust removal methods, the laser rust removal of the mold surfaces deserves more extensive research and application due to its advantages of high efficiency, precision and environmentally friendly.
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shiguang Liu, Shufeng Sun, Jin Wang, Xi Wang, Fengyun Zhang, Yunlong Zhang, and Li Liu "Effect of laser rust removal on surface roughness of 3Cr2Mo die steel", Proc. SPIE 11885, International Conference on Laser, Optics and Optoelectronic Technology (LOPET 2021), 1188505 (24 June 2021); https://doi.org/10.1117/12.2602274
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top