Paper
2 December 2020 Assembly and error analysis of back focal plane-typed apertometer
Author Affiliations +
Proceedings Volume 11717, 24th National Laser Conference & Fifteenth National Conference on Laser Technology and Optoelectronics; 117171Y (2020) https://doi.org/10.1117/12.2587151
Event: 24th National Laser Conference & Fifteenth National Conference on Laser Technology and Optoelectronics, 2020, Shanghai, China
Abstract
Generating reference on the back focal plane (BFP) of objective lens has been an excellent solution for numerical aperture (NA) measurement. Although the effectiveness of the concept of BFP reference has been verified theoretically and experimentally, there has been no practical apertometer based on this concept. The main challenge is how to realize the assembly of the system. In this work, we present the instrument assembly of the apertometer based on BFP reference, which mainly has three requirements. After that, we specifically investigate the influence of the location of the coverslip on BFP image and NA value by using ZEMAX. This work promotes the instrumentation of BFP-typed apertometer significantly.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Cuiling Zhang, Haozhe Tian, and Bei Zhang "Assembly and error analysis of back focal plane-typed apertometer", Proc. SPIE 11717, 24th National Laser Conference & Fifteenth National Conference on Laser Technology and Optoelectronics, 117171Y (2 December 2020); https://doi.org/10.1117/12.2587151
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top