Presentation + Paper
5 March 2021 Laser beam welding with mobile vacuum: MoVac
Author Affiliations +
Abstract
Laser beam welding in vacuum (LaVa) is a process modification of laser beam welding that combines the advantages of laser and electron beam. Due to the reduced pressure, the evaporation temperature of Aluminum and Iron decreases. by approx. 1000 K. As a result, the penetration depth can be significantly increased compared to conventional laser beam welding, while maintaining the same beam power. State of the art research shows that previously unattainable penetrations depths of up to 80 mm can be achieved in steel. Up to now, laser beam welding in vacuum has been a stationary process and was bound to vacuum chambers. However, since high penetration depths usually involve large components, the great potential in the thick plate metal sector could not be exploited. Therefore, laser beam welding with mobile vacuum was developed, where a small vacuum chamber is moved alongside the welding process so that the vacuum is generated locally around the weld bath. A dynamic seal is installed between workpiece and mobile vacuum chamber, so that a pressure of approx. 10 - 20 mbar can be generated, which is sufficient for the process. Current investigations show that steel plates with a thickness of 40 mm can be joined in one layer with only 12 kW beam power. Furthermore, the process shows a high tolerance for edge offsets and gaps. In the latter case, filler material is used to bridge gaps larger than 0.5 mm.
Conference Presentation
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
B. Gerhards, M. Schleser, and C. Otten "Laser beam welding with mobile vacuum: MoVac", Proc. SPIE 11679, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems X, 1167909 (5 March 2021); https://doi.org/10.1117/12.2581915
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Aluminum

Bridges

Electron beams

Iron

Laser development

Laser processing

Laser welding

RELATED CONTENT

Process Aspects Of Laser WeldinG
Proceedings of SPIE (July 25 1979)
Study of a fiber laser assisted friction stir welding process
Proceedings of SPIE (February 14 2012)
Designing Parts For Laser Processing
Proceedings of SPIE (September 30 1985)

Back to Top