X-ray luminescence computed tomography (XLCT) imaging is a hybrid molecular imaging modality combining the merits of both conventional x-ray imaging (high spatial resolution) and optical imaging (high measurement sensitivity). The narrow x-ray beam based XLCT imaging has been shown to be promising. However due to the selective excitation scheme, the imaging speed is slow thus limiting its practical applications for in vivo imaging. In this work, we have introduced a continuous scanning scheme to acquire data for each angular projection in one motion, eliminating the previous stepping scheme and reducing the data acquisition time, which makes it feasible for multiple transverse scans for three-dimensional (3D) imaging. We have introduced a high accuracy vertical stage to our focused x-ray beam based XLCT imaging system to perform high-resolution and 3D XLCT imaging. We have also included a scintillator crystal coupled to a PMT to act as a single-pixel detector for boundary detection purposes to replace our previous flat panel x-ray detector. We have verified the feasibility of our proposed scanning scheme and imaging system by performing phantom experimental studies. A phantom was embedded with a set of cylindrical targets with 200 μm edge-to-edge distance and was scanned in our imaging system with the proposed method. To test the feasibility for 3D scanning, we took measurements from 4 transverse slices with a vertical step size of 1 mm. The results of the experiments verified the feasibility of our proposed method to perform 3D XLCT imaging using a narrow x-ray beam in a reasonable time.
|