Paper
28 August 2019 Strain monitoring using distributed Rayleigh sensing
Author Affiliations +
Proceedings Volume 11199, Seventh European Workshop on Optical Fibre Sensors; 111991U (2019) https://doi.org/10.1117/12.2539661
Event: Seventh European Workshop on Optical Fibre Sensors, 2019, Limassol, Cyprus
Abstract
Rayleigh Backscatter has been used for many years as the source signal for fibre optic distributed acoustic sensing (DAS) in many industrial and civilian activities such as situational information monitoring and down-hole hydrocarbon exploitation. The signal from a DRS system is affected by temperature, strain and acoustics/vibrations. The very low frequency content representing temperature and strain contributions has historically been overlooked in favour of the higher frequency acoustic content. In this paper we describe the potential of a quantitative DRS system to deliver low frequency strain monitoring together with an understanding of the degree of thermal coupling to the system which allows useful results. A long term (50 day) measurement using a quantitative DRS system was carried out to investigate how much drift there was in the system and demonstrate a compensation approach. An example of strain monitoring in a novel pipeline system is illustrated to show the degree of measurement resolution deliverable as compared to conventional strain gauges.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Roger Crickmore, Alastair Godfrey, and Chris Minto "Strain monitoring using distributed Rayleigh sensing", Proc. SPIE 11199, Seventh European Workshop on Optical Fibre Sensors, 111991U (28 August 2019); https://doi.org/10.1117/12.2539661
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Phase measurement

Acoustics

Structural monitoring

Fiber optics sensors

Strain analysis

Back to Top