Intrinsic surface feature based subaperture stitching of freeform wavefront

Kamal K. Pant; Dali R. Burada; Vinod Mishra; L. M. Pant; Amitava Ghosh; Gufran S. Khan; Stefan Sinzinger; Chandra Shakher

doi:10.1117/12.2526037

21 June 2019 Intrinsic surface feature based subaperture stitching of freeform wavefront

Kamal K. Pant, Dali R. Burada, Vinod Mishra, L. M. Pant, Amitava Ghosh, Gufran S. Khan, Stefan Sinzinger, Chandra Shakher

Author Affiliations +

Proceedings Volume 11057, Modeling Aspects in Optical Metrology VII; 1105708 (2019) https://doi.org/10.1117/12.2526037
Event: SPIE Optical Metrology, 2019, Munich, Germany

Abstract

The subaperture stitching technique requires the registration of freeform subapertures into global coordinate frame before stitching in order to compute entire freeform wavefront. A scanning Shack-Hartman Sensor (SHS) utilizes translation stages to scan the freeform surface in XY plane and measure the slope data of various subapertures. The measured slope data is then integrated using weighted cubic spline (WCSLI) based integration method to compute the phase data. The positioning error during scanning causes misalignments between the measured subapertures and their nominal values. The least square based subaperture stitching methods are not capable to minimize lateral misalignment errors of freeform subapertures and therefore degrade the performance of subaperture stitching process. In this work, we have utilized fiducial added planes for correction of angular and rotation misalignments of an extended cubic phase plate. An intrinsic surface feature (ISF) based registration method is used for lateral misalignment corrections. Gaussian curvature is used as an intrinsic pattern which can be defined as one of the fundamental second order geometric properties of a surface. Any shift in the peaks of the Gaussian curvature of reference and measured subaperture corresponds to lateral misalignments in X and Y directions and need to be minimized before registration of subaperture into global frame of reference. After precise registrations, all the subapertures are stitched with consistent overlapping area by using least square fitting method. A numerical validation of the proposed scheme is carried out which demonstrates the effectiveness of the proposed method to improve the subaperture stitching accuracy.

Citation Download Citation

Kamal K. Pant, Dali R. Burada, Vinod Mishra, L. M. Pant, Amitava Ghosh, Gufran S. Khan, Stefan Sinzinger, and Chandra Shakher "Intrinsic surface feature based subaperture stitching of freeform wavefront", Proc. SPIE 11057, Modeling Aspects in Optical Metrology VII, 1105708 (21 June 2019); https://doi.org/10.1117/12.2526037

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
10 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Wavefronts

Image registration

Photovoltaics

Metrology

Data integration

Manufacturing

Phase measurement

Show All Keywords

Keywords/Phrases

Search In:

Publication Years