Paper
2 November 2018 Dynamic 3D projection display system using printed holographic display plate
Author Affiliations +
Abstract
To meet the increasing demand for the dynamic naked-eye 3D display, we proposed a new method to realize the dynamic effect of hologram by using the holographic printing technology. We used a convergent light as the object beam to print out a holographic plate through point-by-point exposure inside a photopolymer material. In reproduction, an image processed by two view images of a 3D object was directly projected to the holographic plate as reconstruction beam, and two images were observed from different directions. That is, when we project an image containing several views of a 3D object, based on multi-view principle, we can observe the reconstructed 3D effect. Since the display plate doesn’t carry amplitude information, the content of reproduced 3D image depends on that of the projected image. Thus, a dynamic stereo effect can be achieved by projecting each image processed from a frame of dynamic stereo continuously
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hailan Jin, Xue Xiao, Shuai Gao, Xiaodi Tan, and Guoguo Kang "Dynamic 3D projection display system using printed holographic display plate", Proc. SPIE 10818, Holography, Diffractive Optics, and Applications VIII, 108180L (2 November 2018); https://doi.org/10.1117/12.2501051
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Holography

3D image reconstruction

Image processing

3D image processing

3D displays

Printing

Spherical lenses

RELATED CONTENT

Grating image technology
Proceedings of SPIE (July 27 1995)
Instant holographic portrait printing system
Proceedings of SPIE (March 18 1998)

Back to Top