Paper
9 October 2018 Application of FBG in the experimental measurements of structural elements deformation from cement composites
Pavel Mec, Martin Stolarik, Stanislav Zabka, Martin Novak
Author Affiliations +
Proceedings Volume 10796, Electro-Optical Remote Sensing XII; 107960S (2018) https://doi.org/10.1117/12.2325553
Event: SPIE Security + Defence, 2018, Berlin, Germany
Abstract
Monitoring deformations of structures or testing of supporting elements are important activities in life cycle of structures. Determined large deformation may indicate defect or failure of supporting structures. The aim of the experiments is to show another, less frequently used strain measurement method. The fibber Bragg grating sensor was used for measuring of the strain changes in simple supported concrete beam. These sensors based on optical fibers allow to measure the strain of the fiber by changing the wavelength of light in the deformed fiber. The article describes an experiment conducted at the Faculty of Civil engineering VŠB Technical University of Ostrava. The values measured by these sensors are compared with measurements using traditional methods.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pavel Mec, Martin Stolarik, Stanislav Zabka, and Martin Novak "Application of FBG in the experimental measurements of structural elements deformation from cement composites", Proc. SPIE 10796, Electro-Optical Remote Sensing XII, 107960S (9 October 2018); https://doi.org/10.1117/12.2325553
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Sensors

Refractive index

Cements

Composites

Optical fibers

Bragg gratings

Back to Top