Presentation + Paper
10 July 2018 Process optimization for efficient convergence in large optics fabrication
Author Affiliations +
Abstract
Large optic fabrication is a delicate and time consuming process. Obtaining a large prime optic is often in the critical path of a project and poses a serious risk to both the schedule and budget. The Optical Engineering and Fabrication Facility (OEFF) at the College of Optical Sciences, the University of Arizona, has developed a new way of optimizing its large optic fabrication process for maximum efficiency in convergence. The new process optimization takes the amount of stock material removal, tool characteristics, metrology uncertainty, optic prescription, optic material properties, and resource availability as input parameters and provides an optimized process along with an achievable convergence. This paper presents technical details of the new process optimization and demonstrates performance on 6.5m mirror fabrication at the University of Arizona. Two case studies for an 8.4m GMT off-axis primary mirror segment and a 3.1m TMT convex secondary mirror fabrication are also presented.
Conference Presentation
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chang Jin Oh, Andrew E. Lowman, Hubert M. Martin, and Greg A. Smith "Process optimization for efficient convergence in large optics fabrication", Proc. SPIE 10706, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III, 107060D (10 July 2018); https://doi.org/10.1117/12.2314350
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Polishing

Metrology

Surface finishing

Off axis mirrors

Optical fabrication

Telescopes

RELATED CONTENT


Back to Top