Three-dimensional printing and deformation behavior of low-density target structures by two-photon polymerization

Ying Liu; Ori Stein; John H. Campbell; Lijia Jiang; Nicole Petta; Yongfeng Lu

doi:10.1117/12.2274193

31 August 2017 Three-dimensional printing and deformation behavior of low-density target structures by two-photon polymerization

Ying Liu, Ori Stein, John H. Campbell, Lijia Jiang, Nicole Petta, Yongfeng Lu

Author Affiliations +

Proceedings Volume 10354, Nanoengineering: Fabrication, Properties, Optics, and Devices XIV; 103541U (2017) https://doi.org/10.1117/12.2274193
Event: SPIE Nanoscience + Engineering, 2017, San Diego, California, United States

Abstract

Two-photon polymerization (2PP), a 3D nano to microscale additive manufacturing process, is being used for the first time to fabricate small custom experimental packages (“targets”) to support laser-driven high-energy-density (HED) physics research. Of particular interest is the use of 2PP to deterministically print low-density, low atomic-number (CHO) polymer matrices (“foams”) at millimeter scale with sub-micrometer resolution. Deformation during development and drying of the foam structures remains a challenge when using certain commercial photo-resins; here we compare use of acrylic resins IP-S and IP-Dip. The mechanical strength of polymeric beam and foam structures is examined particularly the degree of deformation that occurs during the development and drying processes. The magnitude of the shrinkage in the two resins in quantified by printing sample structures and by use of FEA to simulate the deformation. Capillary drying forces are shown to be small and likely below the elastic limit of the core foam structure. In contrast the substantial shrinkage in IP-Dip (~5-10%) cause large shear stresses and associated plastic deformation particularly near constrained boundaries such as the substrate and locations with sharp density variation. The inherent weakness of stitching boundaries is also evident and in certain cases can lead to delamination. Use of IP-S shows marked reduction in deformation with a minor loss of print resolution

Citation Download Citation

Ying Liu, Ori Stein, John H. Campbell, Lijia Jiang, Nicole Petta, and Yongfeng Lu "Three-dimensional printing and deformation behavior of low-density target structures by two-photon polymerization", Proc. SPIE 10354, Nanoengineering: Fabrication, Properties, Optics, and Devices XIV, 103541U (31 August 2017); https://doi.org/10.1117/12.2274193

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available