Design of a lighting system with high-power LEDs, large area electronics, and light management structure in the LUMENTILE European project

L. Carraro; M. Simonetta; G. Benetti; A. Tramonte; G. Capelli; M. Benedetti; E. M. Randone; A. Ylisaukko-oja; K. Keränen; T. Facchinetti; G. Giuliani

doi:10.1117/12.2251795

16 February 2017 Design of a lighting system with high-power LEDs, large area electronics, and light management structure in the LUMENTILE European project

L. Carraro, M. Simonetta, G. Benetti, A. Tramonte, G. Capelli, M. Benedetti, E. M. Randone, A. Ylisaukko-oja, K. Keränen, T. Facchinetti, G. Giuliani

Author Affiliations +

Proceedings Volume 10124, Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XXI; 1012419 (2017) https://doi.org/10.1117/12.2251795
Event: SPIE OPTO, 2017, San Francisco, California, United States

Abstract

LUMENTILE (LUMinous ElectroNic TILE) is a project funded by the European Commission with the goal of developing a luminous tile with novel functionalities, capable of changing its color and interact with the user. Applications include interior/exterior tile for walls and floors covering, high-efficiency luminaries, and advertising under the form of giant video screens. High overall electrical efficiency of the tile is mandatory, as several millions of square meters are foreseen to be installed each year. Demand is for high uniformity of the illumination of the top tile surface, and for high optical extraction efficiency. These features are achieved by smart light management, using a new approach based on light guiding slab and spatially selective light extraction obtained using both diffusion and/or reflection from the top and bottom interfaces of the optical layer. Planar and edge configurations for the RGB LEDs are considered and compared. A square shape with side length from 20cm to 60cm is considered for the tiles. The electronic circuit layout must optimize the electrical efficiency, and be compatible with low-cost roll-to-roll production on flexible substrates. LED heat management is tackled by using dedicated solutions that allow operation in thermally harsh environment. An approach based on OLEDs has also been considered, still needing improvement on emitted power and ruggedness.

Conference Presentation

Citation Download Citation

L. Carraro, M. Simonetta, G. Benetti, A. Tramonte, G. Capelli, M. Benedetti, E. M. Randone, A. Ylisaukko-oja, K. Keränen, T. Facchinetti, and G. Giuliani "Design of a lighting system with high-power LEDs, large area electronics, and light management structure in the LUMENTILE European project", Proc. SPIE 10124, Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XXI, 1012419 (16 February 2017); https://doi.org/10.1117/12.2251795

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available