Paper
1 September 1987 Quantification Of Laser Interference Fringes As Applied To Plasma Etch Endpoint Detection
Russell Deaton, Allen George
Author Affiliations +
Abstract
As integrated circuit feature sizes have continued to decrease, plasma etching has become the method of choice for achieving the resolution and process control required for device fabrication. To maintain tight control, the precise detection of etch endpoint is very important. A variety of endpoint detection schemes are available. These include the optical emission spectroscopy, mass spectroscopy, monitoring of chamber pressure and dc bias, and laser interferometry. This paper deals with the application of laser inteferometry for endpoint detection in plasma or dry etching, which is the removal of a film in a plasma or low pressure gaseous discharge. Etching consists of the following steps. The exposed film, i.e. not covered by resist, is removed by chemical and/or physical processes which are determined by the type of etch. In plasma etching, the etching is done by ions and highly reactive chemical species called free radicals. There are many different types of dry etch methods. In this case, the process was RIE, reactive ion etching, where chemical and physical effects interact to produce the etch.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Russell Deaton and Allen George "Quantification Of Laser Interference Fringes As Applied To Plasma Etch Endpoint Detection", Proc. SPIE 0774, Lasers in Microlithography, (1 September 1987); https://doi.org/10.1117/12.940402
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Phase shifts

Oxides

Reflection

Plasma etching

Refraction

Absorption

Back to Top