Paper
14 January 1987 Effects Of Disk Substrate Quality On Optical Drive Performance
C. H. Chung, William Harvey
Author Affiliations +
Abstract
The quality of substrate that exists between the optical head and the media sensitive layer is known to critically influence the drive performance. First, we report here the degradation of the servo and read signals by the parallelism of the two surfaces of the plastic substrate. It is conclusive that the peak to peak variation of plastic parallelism in the radial direction over one revolution can cause tracking instability and data cross talk. Consequently, the seek accuracy and bit timing accuracy in the optical drive are degraded. Second, we report that the variation of birefringence over one revolution results in the variation of light feedback into the laser cavity. This increases the laser noise, and thus degrades the read performance, especially when the laser output power is in the lower range.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. H. Chung and William Harvey "Effects Of Disk Substrate Quality On Optical Drive Performance", Proc. SPIE 0695, Optical Mass Data Storage II, (14 January 1987); https://doi.org/10.1117/12.936845
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Birefringence

Servomechanisms

Optical tracking

Data storage

Chromium

Glasses

Thin films

RELATED CONTENT

Magneto-optical storage card
Proceedings of SPIE (February 07 2001)
Interlinked Tracking Servo Technology
Proceedings of SPIE (January 14 1987)
Storage technologies (Invited Paper)
Proceedings of SPIE (October 28 1992)

Back to Top