Paper
12 October 1977 Interlaboratory Comparison Of Mtf Measurements In Japan
T. Nitou, Professor T. Ose
Author Affiliations +
Proceedings Volume 0098, Assessment of Imaging Systems I; (1977) https://doi.org/10.1117/12.955280
Event: Assessment of Imaging Systems, 1976, London, United Kingdom
Abstract
The working group of Japan Optical Engineering Research Association (JOERA) was organized in 1974 and made interlaboratory'domparisons of MTF measurements and OTF Standardization. MTF measurements were taken at eight to ten places, using two standard lenses. Standard lens II: Petzval type, f/2, f=50mm, infinite conjugate angular field up to 5°, λ=546nm Standard lens III : Gauss type, f/2.8, f=50mm, infinite conjugate angular field up to ±25°,λ=546nm As a measure for international comparison, SIRA Institute and JOERA exchanged their standard lens and performed measurements. The results of MTF measurements showed good coincide on the axis, but the spread of max. ±0.15 off the axis. We have examined the cause of this error. The measurement using monochromatic light except e-line and white light does not show good coincide. Then this year we intend to investigate this subject in both calculation and measurement.
© (1977) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. Nitou and Professor T. Ose "Interlaboratory Comparison Of Mtf Measurements In Japan", Proc. SPIE 0098, Assessment of Imaging Systems I, (12 October 1977); https://doi.org/10.1117/12.955280
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Optical transfer functions

Lenses

Lamps

Cameras

Imaging systems

Error analysis

RELATED CONTENT

Optical testing of MISR lenses and cameras
Proceedings of SPIE (October 31 1996)

Back to Top