Volume Table of Contents

PROCEEDINGS VOLUME 7282

AOMATT 2008 - 4TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING | 19-21 NOVEMBER 2008

4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies

Editor(s): Li Yang, John M. Schoen, Yoshiharu Namba, Shengyi Li

Editor Affiliations +

IN THIS VOLUME

4 Sessions, 141 Papers, 0 Presentations

Front Matter: Volume 7282 (1)

Session 2-1 (9)

Session 2-2 (9)

Poster Session (122)

AOMATT 2008 - 4TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING

19-21 November 2008

Chengdu, Chengdu, China

View the SPIE Conference + Exhibitions Calendar

Subscribe to Digital Library

VIEW ALL ABSTRACTS +

Front Matter: Volume 7282

Front Matter: Volume 7282 Open Access

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728201 (2009) https://doi.org/10.1117/12.834721

Read Abstract +

Session 2-1

Direct diamond turning of steel molds for optical replication Paper

Fritz Klocke, Olaf Dambon, Benjamin Bulla, Michael Heselhaus

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728202 (2009) https://doi.org/10.1117/12.830778

Read Abstract +

Double-swing method used for polishing off-axis aspherical mirrors Paper

Peng Wang, Jun-feng Li, Bin Xuan, Xiao-ping Chen, Shu-mei Song, Ya Chen, Jing-jiang Xie

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728203 (2009) https://doi.org/10.1117/12.830781

Read Abstract +

A mechanistic cutting force model for diamond fly-cutting of microstructured surface Paper

Qingliang Zhao, Bing Guo, Hui Yang, Xiaohu Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728204 (2009) https://doi.org/10.1117/12.830782

Read Abstract +

Precision compression molding process of low Tg glass aspheric lenses Paper

Tao Ma, Jingchi Yu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728205 (2009) https://doi.org/10.1117/12.830783

Read Abstract +

Fabrication of microglass lens mould by using ultraprecision microgrinding process Paper

Shaohui Yin, Kun Tang, Yongjian Zhu, Fengjun Chen, Yufeng Fan, Li Guo

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728206 (2009) https://doi.org/10.1117/12.830785

Read Abstract +

Polishing of silicon based advanced ceramics Paper

Fritz Klocke, Olaf Dambon, Richard Zunke, D. Waechter

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728207 (2009) https://doi.org/10.1117/12.830786

Read Abstract +

Freeform turning lathe with direct drives and aerostatic bearing Paper

Chao-liang Guan, Yi-fan Dai, Zi-qiang Yin, Fan Yang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728208 (2009) https://doi.org/10.1117/12.830788

Read Abstract +

Influence of slurry pH on material removal rate and surface roughness of super-precision polishing of LBO crystal Paper

Jun Li, Yongwei Zhu, Dunwen Zuo, Yong Zhu, Chuangtian Chen

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728209 (2009) https://doi.org/10.1117/12.830789

Read Abstract +

Material removal rate based on edge effects in ultraprecision polishing process Paper

Wei Yang, YinBiao Guo, Qiao Xu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820A (2009) https://doi.org/10.1117/12.830791

Read Abstract +

Session 2-2

Finite element simulation and experimental research in cutting forces of KDP crystal Paper

Jinghe Wang, Qingxin Meng, Hongxiang Wang, Shen Dong, Jian Guo

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820B (2009) https://doi.org/10.1117/12.830793

Read Abstract +

Experimental investigation on the effect of abrasive grain size on the lapping uniformity of a sapphire wafer Paper

Donghui Wen, Zhiwei Wang, Kehua Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820C (2009) https://doi.org/10.1117/12.830794

Read Abstract +

Study on the influence and disposal method of the micro-cracks of optical components Paper

Xiao-ping Chen, Bin Xuan, Peng Wang, Jun-feng Li, Shu-mei Song, Hong Zhang, Jing-jiang Xie

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820D (2009) https://doi.org/10.1117/12.830795

Read Abstract +

Experimental investigation on polishing of ultrasmooth surface in nanoparticle colloid jet machining Paper

Xiaozong Song, Yong Zhang, Feihu Zhang, Dianrong Luan

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820E (2009) https://doi.org/10.1117/12.830796

Read Abstract +

Optical design and optimization of zoom optics with diffractive optical element Paper

Yi-Chin Fang, Han-Ching Lin

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820F (2009) https://doi.org/10.1117/12.830797

Read Abstract +

Effects of velocity and pressure distributions on material removal rate in polishing process Paper

Yaguo Li, Jian Wang, Qaio Xu, Wei Yang, Yinbiao Guo

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820G (2009) https://doi.org/10.1117/12.830798

Read Abstract +

Development of an ultraprecision three axis micromilling machine Paper

Peng Zhang, Bo Wang, Yingchun Liang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820H (2009) https://doi.org/10.1117/12.830799

Read Abstract +

Deterministic magnetorheological finishing of optical aspheric mirrors Paper

Ci Song, Yifan Dai, Xiaoqiang Peng, Shengyi Li, Feng Shi

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820I (2009) https://doi.org/10.1117/12.830800

Read Abstract +

Image density property of optical information recording microcapsule material Paper

Weidong Lai, Xiaowei Li, Xinzheng Li, Guangsheng Fu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820J (2009) https://doi.org/10.1117/12.830801

Read Abstract +

Poster Session

Study on experiment of grinding SiC mirror with fixed abrasive Paper

Xu Wang, Xue-jun Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820K (2009) https://doi.org/10.1117/12.830802

Read Abstract +

Structures and graphics of spacial spherical parallel grids with laser direct writing Paper

Changhong Hu, Zhezhou Yu, Zhe Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820L (2009) https://doi.org/10.1117/12.830803

Read Abstract +

Transfer matrix method and dispersive formula of light in thin films Paper

Hong-xia Dai, Qi-neng Liu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820M (2009) https://doi.org/10.1117/12.830804

Read Abstract +

Design of aspherical surfaces for panoramic imagers using multi-populations genetic algorithm Paper

Li-Ping Wang, Zhong-zhu Liang, Chun-Shui Jin

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820N (2009) https://doi.org/10.1117/12.830805

Read Abstract +

Three regions in the material removal rate with the increase of the concentration of abrasives slurry Paper

YinBao Guo, Wei Yang, Qiao Xu, YaGuo Li

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820O (2009) https://doi.org/10.1117/12.830806

Read Abstract +

Annealing induced optical properties of YSZ thin films prepared by EB-PVD Paper

Chao-Yang Li, Guang-Jian Xing, Yong-Jun Yang, Wei Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820P (2009) https://doi.org/10.1117/12.830807

Read Abstract +

Study of PZT actuated deformable aspheric polishing lap Paper

Ziqiang Hu, Ning Ling, Junhua Pan, Wenhan Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820Q (2009) https://doi.org/10.1117/12.830808

Read Abstract +

Infrared antireflection DLC films by femtosecond pulsed laser deposition Paper

Shuyun Wang, Yanlong Guo, Xiaobing Wang, Yong Cheng, Huisheng Wang, Xu Liu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820R (2009) https://doi.org/10.1117/12.830809

Read Abstract +

Influence of cutting velocity on surface roughness of KDP Paper

Y. F. Peng, Y. B. Guo, Q. Xu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820S (2009) https://doi.org/10.1117/12.830810

Read Abstract +

Influence of tool presetting error on surface accuracy in ultraprecision machining Paper

Guo Li, Bo Wang, Xuesen Zhao, Shen Dong

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820T (2009) https://doi.org/10.1117/12.830811

Read Abstract +

Research on realization technique of precision forming for laser shock Paper

Sumin Yin, Shandong Qi

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820U (2009) https://doi.org/10.1117/12.830812

Read Abstract +

Experiment and simulation of micromilling process for plastic material Paper

Yazhou Sun, Qingxin Meng, Haitao Liu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820V (2009) https://doi.org/10.1117/12.830813

Read Abstract +

IAD-Si coatings on RB-SiC space mirrors for ultrasmooth surfaces Paper

Lingdi Xu, Xuejun Zhang, Ruigang Li, Feng Zhang, Xu Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820W (2009) https://doi.org/10.1117/12.830814

Read Abstract +

Research of optical flats in pad polishing Paper

Jian Wang, Yinbiao Guo, Yaguo Lee, Qiao Xu, Wei Yang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820X (2009) https://doi.org/10.1117/12.830815

Read Abstract +

Improved two-dimensional orthogonal cylindrical lens arrays optical system with controllable focus profile for uniform irradiation Paper

Jianzhou Zheng, Qingxu Yu, Bin Dong, Xiaojun Cao, Shouhua Guan, Qi Yang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820Y (2009) https://doi.org/10.1117/12.830816

Read Abstract +

Research on the surface of a nonspherical lens with photosensitive colophony Paper

Fu Zhao, Ping Wang, Yanjue Gong, Hongbing Xin, Chunling Meng, Hui Zhu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820Z (2009) https://doi.org/10.1117/12.830817

Read Abstract +

Manufacturing of the 1070mm F/1.5 ellipsoid mirror Paper

Peiji Guo, Jingchi Yu, Yaoming Zhang, Gufeng Qiu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728210 (2009) https://doi.org/10.1117/12.830818

Read Abstract +

Fast tool servo system for online compensation of error motion on an ultraprecision lathe Paper

Xiaohui Wang, Tao Sun

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728211 (2009) https://doi.org/10.1117/12.830820

Read Abstract +

Smoothing treatment of high order aspherical surface Paper

Jianfeng Ren, Binfei Dai, Guanghua Xu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728212 (2009) https://doi.org/10.1117/12.830821

Read Abstract +

Methods for increasing the etching uniformity of ion beam multiple mask Paper

Xiaobo Zhang, Ying Xiong, Qiang Liu, Yangchao Tian

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728213 (2009) https://doi.org/10.1117/12.830822

Read Abstract +

Novel method for optimizing polishing tool-path in CCOS based on weighted-iterative algorithm Paper

Wei-jie Deng, Xue-jun Zhang, Xiao-kun Wang, Xu Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728214 (2009) https://doi.org/10.1117/12.830823

Read Abstract +

Effects of thickness and substrate temperature on the electrical and optical properties of In₂O₃-ZnO films Paper

Yu Pei, Fachun Lai, Limei Lin, Liqin Fan, Yan Qu, Rong Chen

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728215 (2009) https://doi.org/10.1117/12.830824

Read Abstract +

Investigation of conductive and transparent Al-doped ZnO/metal dual-layer films by magnetron sputtering Paper

Liqin Fan, Fachun Lai, Limei Lin, Yu Pei, Yan Qu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728216 (2009) https://doi.org/10.1117/12.830860

Read Abstract +

Optical and electrochemical properties of the protonic state electrochromic device: NiO_x/Ta₂O₅/WO_3-x Paper

Zhuying Li, Liu Ye, Minliang Zhang, Chonglou Shun

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728217 (2009) https://doi.org/10.1117/12.830861

Read Abstract +

Optimization of actuator forces in shaping aspheric surfaces on ultrathin mirrors Paper

Chunmei Zeng, Jingchi Yu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728218 (2009) https://doi.org/10.1117/12.830862

Read Abstract +

Moment acting on workpiece in solid abrasive plane lapping Paper

Jiandong Yang, Chunlin Tian, Ziqiang Hao, Haiyang Yang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728219 (2009) https://doi.org/10.1117/12.830863

Read Abstract +

Influences of cutting section and corner radius to cutting force in diamond turning Paper

Guojun Dong, Chengshun Han, Shen Dong, Tao Sun

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821A (2009) https://doi.org/10.1117/12.830865

Read Abstract +

Research on high-speed deposition thermodynamics characteristic for DLC thin film by RF-PECVD Paper

Mi Zhu, Changxin Xiong, Changcheng Yang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821B (2009) https://doi.org/10.1117/12.830867

Read Abstract +

Transparent conductive titanium-doped indium oxide films prepared by direct current magnetron sputtering Paper

Limei Lin, Fachun Lai, Yan Qu, Rongquan Gai

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821C (2009) https://doi.org/10.1117/12.830868

Read Abstract +

Optical properties of In-doped TiO₂ thin films Paper

Mingliang Zhang, Zhuying Li, Cunlou Sun, Shaohong Yang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821D (2009) https://doi.org/10.1117/12.830869

Read Abstract +

Research on ultrathin mirror fabrication and demonstration of an &slasho;500mm ultrathin mirror Paper

Qitai Huang, Peiji Guo, Jingchi Yu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821E (2009) https://doi.org/10.1117/12.830870

Read Abstract +

Wide-angle and broadband nonpolarizing parallel plate beam splitter Paper

Wenliang Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821F (2009) https://doi.org/10.1117/12.830871

Read Abstract +

Effect of substrate bias and arc current on AlN films Paper

Haifeng Liang, Hengping Liu, Yang Zhou

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821G (2009) https://doi.org/10.1117/12.830872

Read Abstract +

Primary optical system design for the optimization of light-emitting diode packages Paper

Jian Zhang, Zhi-wen Hu, Hao-chen Qi, Cheng-yue Liu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821H (2009) https://doi.org/10.1117/12.830875

Read Abstract +

Design of a detection system of highlight LED arrays' effect on the human organization Paper

Shuwang Chen, Guiju Shi, Tongze Xue, Yanming Liu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821I (2009) https://doi.org/10.1117/12.830876

Read Abstract +

Analyzing and processing the images of self-organized patterns Paper

Xiaohong Yang, Shuhua Liu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821J (2009) https://doi.org/10.1117/12.830877

Read Abstract +

Optical design of long focal length and wide field on an aerial CCD camera Paper

Xiaowei Cheng, Ying Che, Changxi Xue

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821K (2009) https://doi.org/10.1117/12.830878

Read Abstract +

LED optical engine based on a rectangular CPC for microprojection display Paper

Shu-ying Wang, Wen-jun Sun, Wen-bin Bu, Zhong Meng

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821L (2009) https://doi.org/10.1117/12.830879

Read Abstract +

Vector analysis of the characteristics of diffractive microlens having common focus for a number of wavelengths Paper

Yuling Liu, Chenghua Sui, Pinggen Cai

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821M (2009) https://doi.org/10.1117/12.830880

Read Abstract +

Indium-tin oxide conductive films on flexible substrates deposited by the DC magnetron sputtering method Paper

Nana Wang, Junsheng Yu, Hui Lin, Shuangling Lou, Yadong Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821N (2009) https://doi.org/10.1117/12.830881

Read Abstract +

Methods for improving ion beam etching uniformity of large-sized DOEs Paper

Ying Xiong, Xiaobo Zhang, Gang Liu, Ying Liu, Dequan Xu, Yangchao Tian

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821O (2009) https://doi.org/10.1117/12.830882

Read Abstract +

Preparation of TiN solar spectrally selective absorbing thin film by DC magnatron sputtering Paper

Shuying Fu, Zhenquan Lai, Wei Zhong, Xiurong Zhu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821P (2009) https://doi.org/10.1117/12.830883

Read Abstract +

Design of a time-correlated single photon counting spectrometer based on PC Paper

Xiu-feng Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821Q (2009) https://doi.org/10.1117/12.830884

Read Abstract +

Study on fabrication technology of silicon-based silica array waveguide grating Paper

Yanjun Sun, Lianhe Dong, Yanbing Leng

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821R (2009) https://doi.org/10.1117/12.830885

Read Abstract +

Numerical simulation of selective laser sintering transient temperature field Paper

Jian Xing, Xiaogang Sun

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821S (2009) https://doi.org/10.1117/12.830886

Read Abstract +

A new algorithm to locate the laser spot center at a sub-pixel level Paper

Ruifang Ye, Chun Lin, Zhenheng Lin, Xizhao Lu, Xiaolan Chu, Yuanqing Huang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821T (2009) https://doi.org/10.1117/12.830887

Read Abstract +

Transmission spectra dependence on the grating lengths of long period fiber grating fabricated by 800nm femtosecond laser pulses Paper

Yongqin Yu, Shuangchen Ruan, Yi Huang, Chenlin Du

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821U (2009) https://doi.org/10.1117/12.830888

Read Abstract +

Integrated development environment based on resource library for intelligent opto-electric instruments Paper

Ming Cen, Ping Wang, Xingfa Liu, Jianchun Jiang, Kaibi Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821V (2009) https://doi.org/10.1117/12.830889

Read Abstract +

Technique of adaptive laser beam shaping based on stochastic parallel gradient descent Paper

Huizhen Yang, Yuran Liu, Xinyang Li, Xunyin Bi

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821W (2009) https://doi.org/10.1117/12.830890

Read Abstract +

Ultraprecision finishing process integrated ELID grinding and MRF for BK glass Paper

Shaohui Yin, Hitoshi Ohmori, Yoshihiro Uehara, Yongjian Zhu, Fengjun Chen, Kejun Zhu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821X (2009) https://doi.org/10.1117/12.830891

Read Abstract +

Analysis of parameters in fluid jet polishing by CFD Paper

Chun Yan Shi, Jia Hu Yuan, Fan Wu, Yong Jian Wan, Yu Han

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821Y (2009) https://doi.org/10.1117/12.830892

Read Abstract +

Geometric models of precision machining conic optical asphere Paper

Cheng-Shun Han, Shen-Wang Lin, Long-Jiang Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72821Z (2009) https://doi.org/10.1117/12.830893

Read Abstract +

3D finite element simulation and experiment of residual stress on the cutting surface Paper

Haitao Liu, Yazhou Sun, Zesheng Lu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728220 (2009) https://doi.org/10.1117/12.830894

Read Abstract +

Study on the calculation and application for asphericity of rectangle off-axis aspherics Paper

Jun-feng Li, Bin Xuan, Peng Wang, Xiao-ping Chen, Hong Zhang, Jing-jiang Xie, Shu-mei Song

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728221 (2009) https://doi.org/10.1117/12.830895

Read Abstract +

Optical system of large relative aperture and wide field using aspheric corrector for detecting Paper

Ming Ming, Jianli Wang, Jingxu Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728222 (2009) https://doi.org/10.1117/12.830896

Read Abstract +

Reversible dark-center diffraction of metal film in micromachining Paper

Jin Xie, Changhe Zhou

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728223 (2009) https://doi.org/10.1117/12.830897

Read Abstract +

Ultraprecision machining of steep aspheric parts with large sagittal height Paper

Lin Mu, Rui Zhao, Qiming Xin

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728224 (2009) https://doi.org/10.1117/12.830898

Read Abstract +

Problems occurred during machining steep aspheric parts with large sagittal height on double-spindle diamond turning machine are presented and the main reasons of the problems are described. And methods of solving these problems are also suggested. When we machine steep aspheric parts with large sagittal height on a 2 axis diamond turning machine, we have such problems as difficult control of part edge accuracy, poor roughness and rapid wear of the cutting tool. The main reasons for these problems lie in: 1) Measurement. To make accurate measurements, the measurement range of the profilometer must fall within the sagittal heights of the aspheric parts, and the measurement angle must also meet the requirements, an insufficient measurement angle, for example, will have a big impact on the measurement and fabrication accuracy of such parts; and 2) Machine and tool, firstly, the diamond cutting tool will suffer a very big force when turning the edge section, resulting in bigger micro-vibration in the tool and tool post, thus affecting the part accuracy and surface roughness. Secondly, the machine itself has location errors in axes X and Z during the processing, leading to the severest destruction in the steep section of the aspheric part by their resultant force. Lastly, anisotropy of diamond cutting tool hardness. The indentation hardness of the diamond is maximum in the direction of <1.0.0> of face (100) and the front clearance has the best strength at tool point in the direction of <1.0.0>. When cutting a steep aspheric part with large sagittal height, a bigger included angle of the diamond tool point arc will be used, and there will be a more deviation from the <1.0.0> lattice direction. So the tool hardness is consistently decreased, resulting in a rapid wear of the cutting tool when turning the steep section of the aspheric part, thus the accuracy and roughness in machining an aspheric part become more difficult to control. The paper is concluded with the solutions of turning steep aspheric parts with large sagittal height. Efforts have been made to reach an accuracy within 1.5 um, Ra 0.007 um (mold insert), and no apparent tool marks on the surface when machining steep aspheric parts with large sagittal height on double-spindle diamond turning machine.

Research on wheel error compensation of aspheric grinding machining Paper

Liangyu He, Yinbiao Guo, Hao Huang, Zhenzhong Wang, Jian Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728225 (2009) https://doi.org/10.1117/12.830899

Read Abstract +

Design of an optical lens for a space tridimensional mapping camera Paper

Li-ping Zhang, Zhi Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728226 (2009) https://doi.org/10.1117/12.830901

Read Abstract +

Effect of several processing parameters on material removal ratio in the deliquescent polishing of KDP crystals Paper

Feihu Zhang, Shaolong Guo, Yong Zhang, Dianrong Luan

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728227 (2009) https://doi.org/10.1117/12.830905

Read Abstract +

Passive Q-switching dynamics in all-fiber lasers with ring interferometer Paper

Lin Huang, Yongzhi Liu, Zhiyong Dai, Qianshu Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728228 (2009) https://doi.org/10.1117/12.830906

Read Abstract +

Ultraprecision fabrication of large stamping die of Wolter mirror for an x-ray telescope by ELID grinding Paper

Shaohui Yin, Hitoshi Ohmori, Yoshihiro Uehara, Fengjun Chen, Yongjian Zhu, Yu Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728229 (2009) https://doi.org/10.1117/12.830907

Read Abstract +

End-pumped Nd:YAG Q-switched laser with high energy and narrow pulse for glass carving Paper

Ming Ling, Guang-yong Jin, Xue-chun Tan, Zhi-chao Wu, Zhu Liang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822A (2009) https://doi.org/10.1117/12.830908

Read Abstract +

Design and fabrication for the diffractive optical element of an infrared system Paper

Changcheng Yang, Shenghui Li, Yong Li, Bin Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822B (2009) https://doi.org/10.1117/12.830909

Read Abstract +

New simplified coupling system of 15MW Nd:YAG laser pulse with 600μm optical fiber by use of a taper fiber Paper

Xinyan Fan, Jingjiao Liu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822C (2009) https://doi.org/10.1117/12.830910

Read Abstract +

Study on the technique of pulse electroforming in optical manufacturing Paper

Hongyou Li, Yinbiao Guo, Xiaomei Liu, Tongqun Ren

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822D (2009) https://doi.org/10.1117/12.830911

Read Abstract +

High brightness white LED driver with adaptive current control strategy Paper

Xin Liu, Shuxu Guo, Lifang Bian, Dong Qiao, Zhengxuan Wang, Yuchun Chang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822E (2009) https://doi.org/10.1117/12.830912

Read Abstract +

Research and design of infrared optical system based on DOE Paper

Xinling Wen

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822F (2009) https://doi.org/10.1117/12.830913

Read Abstract +

Design of a CAN bus interface for photoelectric encoder in the spaceflight camera Paper

Ying Sun, Qiu-hua Wan, Rong-hong She, Chang-hai Zhao, Yong Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822G (2009) https://doi.org/10.1117/12.830986

Read Abstract +

Design on visible diffractive-refractive hybrid collimator Paper

Xu-hua Zhai, Hong-tao Zhang, Hai-shan Zhao, Hai-feng Xu, Zhou Qu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822H (2009) https://doi.org/10.1117/12.830987

Read Abstract +

Three-dimensional thermal analysis for laser assisted machining of ceramics using FEA Paper

Xuefeng Wu, Hongzhi Zhang, Yang Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822I (2009) https://doi.org/10.1117/12.830988

Read Abstract +

Correction capability analysis and experimental validation of a kind of adaptive optics system based on a combined deformable mirror for compensating high-order aberrations Paper

HuaFeng Yang, ChangHui Rao, WenHan Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822J (2009) https://doi.org/10.1117/12.830989

Read Abstract +

ITO glass polishing using carbon dioxide snow jet technique for organic light-emitting diodes Paper

Junjian Li, Tong Li

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822K (2009) https://doi.org/10.1117/12.830990

Read Abstract +

Compositional dependence of absorption edges in evaporated Pb_1-xGeTe thin films as infrared short-wavelength cutoff filters Paper

Bin Li, Suying Zhang, Ping Xie, Dingquan Liu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822L (2009) https://doi.org/10.1117/12.830991

Read Abstract +

Research on antireflection characteristic of rectangular subwavelength surface-relief structure Paper

Weimin Tan, Chun-hua Lu, Zhongzi Xu, Yaru Ni

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822M (2009) https://doi.org/10.1117/12.830992

Read Abstract +

Study on the methods for ensuring the precision of an x-ray microscope Paper

Lingling Zhao, Delin Sun, Peng Liu, Jiasheng Hu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822N (2009) https://doi.org/10.1117/12.830993

Read Abstract +

Simulation of substrate temperature in HFCVD diamond thin films Paper

Yongjie Wang, Huijuan Wang, Zengqian Yin

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822O (2009) https://doi.org/10.1117/12.830994

Read Abstract +

Design of an erbium-doped fiber laser based on ring cavity Paper

Huawei Pang, Hua Lian, Ruimei Zhao, Tianshan Liu, Boning Hu, Huimin Cui, Yafang Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822P (2009) https://doi.org/10.1117/12.830995

Read Abstract +

Pressure distribution model in edge effect Paper

Yu Han, Fan Wu, Yong Jian Wan

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822Q (2009) https://doi.org/10.1117/12.830996

Read Abstract +

Raman active phonons in RMnO₃ (R=La, Pr, Nd, Sm) manganites Paper

Wei-Ran Wang, Geng-Xin Song, Yan Zhao, Xue-Ying Han

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822R (2009) https://doi.org/10.1117/12.830999

Read Abstract +

Cascaded chirped and phase-only sampled fiber Bragg gratings for efficient comb filters Paper

Xiaojun Zhu, Yuling Lu, Chinhua Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822S (2009) https://doi.org/10.1117/12.831000

Read Abstract +

Roughness evolution of fused silica during plasma polishing processes Paper

Weiguo Liu, Dasen Wang, Minda Hu, Yingnan Wang, Haifeng Liang, Lingxia Hang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822T (2009) https://doi.org/10.1117/12.831002

Read Abstract +

Study on deposition of amorphous hydrogenate DLC films on germanium substrates by RF-PECVD Paper

Ji-long Tang, Guo-jun Liu, Jing Wang, Zhi-chao Wu, Ying-jie Zhao, Xiu-hua Fu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822U (2009) https://doi.org/10.1117/12.831005

Read Abstract +

Fabrication and characteristics of polarization maintaining polymer photonic crystal fiber with elliptical core Paper

Yani Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822V (2009) https://doi.org/10.1117/12.831007

Read Abstract +

Double grating monochromator optical design of the pure rotational Raman-lidar Paper

Zhen Zhang, Fang Liu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822W (2009) https://doi.org/10.1117/12.831008

Read Abstract +

Method for signal detection of integrated optic gyroscope based on digital signal processing Paper

Zhen Zhang, Xin Yin, Cheng Cheng

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822X (2009) https://doi.org/10.1117/12.831009

Read Abstract +

Low side bands wide spectrum width femtosecond passively mode-locked fiber laser Paper

Yu Zhao, Yongzhi Liu, Deshuang Zhao, Lin Huang, Zhiyong Dai

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822Y (2009) https://doi.org/10.1117/12.831010

Read Abstract +

Lasing behavior in cascade energy transfer in dual-doped polymer microcavities Paper

Xuan-ke Zhao, Qing-hua Zhang, Qing-wu Zhao, Lian-fen Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822Z (2009) https://doi.org/10.1117/12.831011

Read Abstract +

New architectures for high-performance organic solar cell introducing phosphorescent iridium complex Paper

Hui Lin, Junsheng Yu, Wei Zhang, Shuangling Lou, Yadong Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728230 (2009) https://doi.org/10.1117/12.831012

Read Abstract +

High-quality silicon nitride films prepared by low-frequency plasma-enhanced chemical vapor deposition Paper

Huile Zhang, Xiangdong Xu, Yuping Leng, Weizhi Li, Zhiming Wu, Yadong Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728231 (2009) https://doi.org/10.1117/12.831014

Read Abstract +

With their excellent mechanical, thermal, and optical properties, silicon nitride (SiNx) films are widely used as both supporting and insulating materials for MEMS structures. Practical applications of SiNx films rely on their film quality, which will affect the performance and stability of the related devices. In general, SiNx films are deposited by low pressure chemical vapor deposition (LPCVD) or high-frequency (13.56 MHz) plasma-enhanced chemical vapor deposition (HF-PECVD). However, up to now, less reports about the deposition of SiNx films by low-frequency plasma-enhanced chemical vapor deposition (LF-PECVD) have been made. This paper reports the preparation of SiNx thin films by PECVD with a low frequency (380 kHz). The process parameters were carefully optimized for the growth of SiNx films. And the thicknesses and refractive indices of SiNx films were characterized by spectroscopic ellipsometry with small mean square error (MSE<2.5) using Tauc-Lorentz fitting model. It was revealed that the thickness uniformity, deposition rate, and wet etching rate of the as-prepared SiNx films strongly depend on the key process parameters, including RF frequency, power, gas flow ratio, deposition temperature and pressure. Our results also indicated that the refractive index of SiNx film can be rationally tuned to be 1.874 ~ 2.145 by LF-PECVD. Moreover, the wet etching rate of SiNx film in a diluted HF solution can be controlled to be 7.4 to 65.9 nm/min, and the deposition rate ranges from 23.5 to 260.8 nm/min. We also experimentally confirmed that the SiNx thin films deposited with low frequency (380 kHz) exhibit better thickness uniformity, higher deposition rate and lower wet etching rate, compared with those deposited with high frequency (13.56 MHz). Particularly, 150-mm-diameter SiNx thin films with high thickness uniformity (thickness nonuniformity <1.0%) were successfully produced in this work. With their tunable physical properties, the LF-PECVD SiNx thin films exhibit great potential in microelectronics and optoelectronics applications. Moreover, the SiNx films prepared by LF-PECVD are compared with those produced by HF-PECVD and DF-PECVD.

Novel low area CMOS readout circuit for uncooled microbolometers with low noise Paper

Jian Lv, Yadong Jiang, Yun Zhou, Fengwu Luo

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728232 (2009) https://doi.org/10.1117/12.831015

Read Abstract +

High-efficiency blue organic light-emitting devices based on phosphorescent dopant material Paper

Jiang Zhong, Yadong Jiang, Lei Zhang, Junsheng Yu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728233 (2009) https://doi.org/10.1117/12.831016

Read Abstract +

Color-tunable organic light emitting diodes based on exciplex emission Paper

Junsheng Yu, Shuangling Lou, Wen Wen, Yadong Jiang, Qing Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728234 (2009) https://doi.org/10.1117/12.831017

Read Abstract +

Organic thin film transistor with a simplified planar structure Paper

Lei Zhang, Jungsheng Yu, Jian Zhong, Yadong Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728235 (2009) https://doi.org/10.1117/12.831018

Read Abstract +

Concentration effect of dye dopant in organic light emitting diodes Paper

Lu Li, Junsheng Yu, Shuangling Lou, Yadong Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728236 (2009) https://doi.org/10.1117/12.831019

Read Abstract +

Organic light emitting devices based on two novel silole derivatives Paper

Qing Li, Junsheng Yu, Lu Li, Yadong Jiang, Xiaowei Zhan

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728237 (2009) https://doi.org/10.1117/12.831020

Read Abstract +

White organic light emitting diodes based on a novel starburst fluorene derivative Paper

Shuangling Lou, Junsheng Yu, Wen Wen, Yadong Jiang, Qing Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728238 (2009) https://doi.org/10.1117/12.831021

Read Abstract +

Electroplex light emission based on BCP and a novel star-shaped hexafluorenylbenzene Paper

Tao Ma, Junsheng Yu, Shuangling Lou, Yadong Jiang, Qing Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728239 (2009) https://doi.org/10.1117/12.831022

Read Abstract +

Electrical characteristics of phosphorescent organic light emitting devices with various emissive film thickness Paper

Tao Wang, Junsheng Yu, Jun Wang, Lu Li, Yadong Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823A (2009) https://doi.org/10.1117/12.831023

Read Abstract +

Study on charge carrier recombination zone with ultrathin rubrene layer as probe Paper

Wen Wen, Jungsheng Yu, Yi Li, Lu Li, Yadong Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823B (2009) https://doi.org/10.1117/12.831025

Read Abstract +

Preparation and characterization of polyaniline/indium(III) oxide (PANi/In₂O₃) nanocomposite thin film Paper

Xiaolei Yan, Guangzhong Xie, Xiaosong Du, Huiling Tai, Yadong Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823C (2009) https://doi.org/10.1117/12.831026

Read Abstract +

Performance optimization of polymer doped electrophosphorescent organic light emitting diodes Paper

Xiaoqing Tang, Junsheng Yu, Wen Wen, Lu Li, Yadong Jiang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823D (2009) https://doi.org/10.1117/12.831027

Read Abstract +

Photochemical surface modification of flexible plastic substrate for organic light-emitting diodes Paper

Yadong Jiang, Hui Lin, Shuangling Lou, Junsheng Yu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823E (2009) https://doi.org/10.1117/12.831035

Read Abstract +

Influence of hole transporter doping on electroluminescent property of novel fluorene molecular material Paper

Jincheng Qian, Junsheng Yu, Shuangling Lou, Yadong Jiang, Qing Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823F (2009) https://doi.org/10.1117/12.831036

Read Abstract +

Studies on PZT membrane resonant gas sensors Paper

Wenjing Zhao, Xuesheng Li, Liangfeng Xu, Jun Yao, Limei Xu, Yi Ma

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823G (2009) https://doi.org/10.1117/12.831037

Read Abstract +

Study and comparison of two novel laser crystals Dy:NaGd(WO₄)₂,Dy:NaLa(WO₄)₂ Paper

Junjie Yang, Wenqin Yang, Ji Wu, Shangyuan Feng

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823H (2009) https://doi.org/10.1117/12.831038

Read Abstract +

Experimental system of ternary logic optical computer with reconfigurability Paper

Zhang-Yi Shen, Yi Jin, Jun-Jie Peng

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823I (2009) https://doi.org/10.1117/12.831039

Read Abstract +

Construction of a portable UV-VIS spectrophotometer Paper

Sixiang Zhang, Duogang Ran, Feng Wan, Cheng Li

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823J (2009) https://doi.org/10.1117/12.831040

Read Abstract +

Preparation and optical performance detection of acid-leaching optical fiber image bundle Paper

Dechun Zhou, Fengxia Yu, Fang Tan, Jingjuan Lu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823K (2009) https://doi.org/10.1117/12.831041

Read Abstract +

Study on test metrology of large aperture optical system wavefront Paper

Zhiying Liu, Yuegang Fu, Tianyuan Gao, Zhijian Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823L (2009) https://doi.org/10.1117/12.831042

Read Abstract +

A neural-fuzzy model with confidence measure for controlled stressed-lap surface shape presentation Paper

Minyou Chen, Yongjian Wan, Fan Wu, Kaigui Xie, Mingyu Wang, Bin Fan

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823M (2009) https://doi.org/10.1117/12.831065

Read Abstract +

Neural-network-based intelligent control for active stressed lap optical polishing process Paper

Li Yang, Minyou Chen, Yonggjian Wan, Mingyu Wang, Junhui Zhao, Bin Fan, Kaigui Xie

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823N (2009) https://doi.org/10.1117/12.831066

Read Abstract +

Theoretical analysis of stressed mirror polishing Paper

Tianxiang Sun, Li Yang, Yongqian Wu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823O (2009) https://doi.org/10.1117/12.831067

Read Abstract +

Electro-rheological finishing for optical surfaces Paper

Haobo Cheng, Peng Wang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823P (2009) https://doi.org/10.1117/12.831068

Read Abstract +

Athermal design of hybrid refractive/harmonic diffractive optical system for far-infrared multi-band Paper

Ying Liu, Qiang Sun, Zhenwu Lu, Jinying Yue, Hu Zhang, Rui Zhu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823Q (2009) https://doi.org/10.1117/12.831069

Read Abstract +

Fabrication of small period blazed reflection gratings by fast atom beam dry etching method Paper

ChaBum Lee, DoKyun Woo, JaeYoung Joo, Sun-Kyu Lee

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823R (2009) https://doi.org/10.1117/12.831070

Read Abstract +

Mechatronic system design for tiled large-aperture grating Paper

Lihua Lu, Yingchun Liang, Tao Jiang, Fuli Yu, Qingchun Zhang

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823S (2009) https://doi.org/10.1117/12.831071

Read Abstract +

Optimization of removal function parameters in CCOS Paper

Xusheng Zhou, Yuehua Chen, Hongbin Shen, Yongqiang He

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823T (2009) https://doi.org/10.1117/12.831072

Read Abstract +

Study on the surface degenerative layer in ultraprecision machining of KDP crystals Paper

Jinghe Wang, Qingxin Meng, Mingjun Chen, Shen Dong, Zhenxing Li

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823U (2009) https://doi.org/10.1117/12.831073

Read Abstract +

Dynamic analysis of wiresaw slicing brittle crystals Paper

Tao Sun, Yanbo Feng

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823V (2009) https://doi.org/10.1117/12.831074

Read Abstract +

Frequency-domain analysis on the optical surface accuracy Paper

Qinhua Huang, Haobo Cheng, Yongtian Wang, Peng Wang, Lingqi Wu

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823W (2009) https://doi.org/10.1117/12.831075

Read Abstract +

Error analysis of a rotating mode diamond turning large aspherical mirrors Paper

Cheng-Shun Han, Long-Jiang Zhang, Shen Dong, Jiu-Bin Tan

Proceedings Volume 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823X (2009) https://doi.org/10.1117/12.831076

Read Abstract +

Keywords/Phrases

Search In:

Publication Years