Paper
15 November 1978 A Study Of Automatic Brightness Control Operating Protocols And Their Effect On Image Quality
Stephen H. Fairweather, Richard L. Patterson, Gordon P. Stanhope
Author Affiliations +
Abstract
Production of a diagnostic quality fluoroscopic image is predicated on the delivery of a controlled amount of x-radiation to the input phosphor of an image amplifier. Variations in patient thickness and limitations on table top dose rate make it difficult to define simple operating protocols. The work reported on here attempts to resolve this problem by presenting experimental data showing the variation of table top dose with kVp and mA for various water phantom thicknesses required to yield acceptable radiation levels at the intensifier input phosphor. Possible algorithms for resolving the conflict between dose rate and image quality are developed and discussed. The possibility of minimizing patient dose rate for a predescribed spacial resolution is suggested as a fruitful avenue for new work.
© (1978) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stephen H. Fairweather, Richard L. Patterson, and Gordon P. Stanhope "A Study Of Automatic Brightness Control Operating Protocols And Their Effect On Image Quality", Proc. SPIE 0152, Recent and Future Developments in Medical Imaging I, (15 November 1978); https://doi.org/10.1117/12.938195
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Image quality

Aluminum

X-rays

Automatic control

Image resolution

Medical imaging

Image intensifiers

RELATED CONTENT

Performance Of A New, High Contrast 16" X Ray Image...
Proceedings of SPIE (May 01 1989)
Panel Discussion
Proceedings of SPIE (June 01 1972)
Medical Image Intensifier In 1980 (What Really Happened)
Proceedings of SPIE (August 18 1980)
X-Ray Image Intensifiers
Proceedings of SPIE (March 01 1974)
X-Ray Image Intensifiers
Proceedings of SPIE (March 01 1974)

Back to Top